SD/HD/3G, SDI 4 x 1,SDI Signal Switcher
1.0 Specifications
| Weight | 350g |
| SDI Switcher Input Ports | 4 x BNC Female input ports |
| SDI Switcher Output Port | 1 x BNC Female output port |
| Dimensions (mm) | 150 (L) X 65(W) X 25 (H) |
| ESD Protection Human Body Model | ± 8kV (air-gap discharge)± 4kV (contact discharge) |
| Power Supply | DC 5V 1A |
| Frequency Bandwidth | 3Gbps |
| Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
| Storage Temperature | 20°C ~ 60°C / -4°F ~ 140°F |
| Relative Humidity | 20 ~ 90% RH (Non-condensing) |
| Power Consumption (Max) | 3.5W |
2.0 Features
1. Supports 4 SDI input signal switch to 1 HD SDI monitor.
2. Supports SD-SDI(270Mb/s), HD-SDI(1.485Gb/s), 3G-SDI(2.97Gb/s) video format.
3. Built-in cable equilibrium, clock recovery and drive.
4. Supports resolutions up to 1920x1080@60Hz.
5. Supports signal input and output distances of up to 300m for SD signals, 200m for HD signals and 100m for 3G signals.
6. Supports 5-12V wide voltage input.
3.0 Package
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
1. 4x1 SDI Switcher --------------------------------------------- 1PCS
2. 5V 1A DC Power Supply adapter ------------------------ 1PCS
3. Operation Manual -------------------------------------------- 1PCS
4.0 Operation controls and Functions
Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.
Front Panel
1. IR SIGNAL------------------------------IR Signal Receiver
2. L4------------------------------------------- Input 4 Indication
3. L3------------------------------------------- Input 3 Indication
4. L2--------------------------------------------Input 2 Indication
5. L1------------------------------------------- Input 1 Indication
6. POWER-----------------------------Power input Indication
7. MANUAL SELECT--------- Input Signal Switch Button
8. ON/OFF----------------------------------------Power Switch
Rear Panel
9. DC 5V-12V-------------------------Power input Interface
10. SDI OUTPUT-----------------------SDI Output Interface
11. SDI INPUT1-4-------------------SDI Input 1-4 Interface
5.0 Application Example
1. Connect the Coaxial(RG6U) Cable between SDI signal source and SDI
INPUT of SDI Switcher.
2. Connect the Coaxial Cable between SDI Switcher and SDI display.
3. Connect the power adapter between SDI Switcher and outlet.
4. Open the power supply of SDI signal source and the display. Choose
corresponding input ports, then it works.
5. You can select the required signal source via a button or remote control.
Product Tags:
|
|
3G 1920x1080 3Gbps 4 X 1 SDI Signal Switcher Images
|
