SD/HD/3G, SDI 1 x 4, SDI Signal Splitter
1.0 Introduction
1×4 SDI splitter distributes allows 1 SDI, HD-SDI or 3G-SDI video source to 4 SDI/HD-SDI/3G-SDI displays simultaneously. This product built-in automatic identification and compatible with SD-SDI, HD-SDI, 3G-SDI all format of SDI signal. It is the support 2.97Gbps bandwidth, and supports lossless transmission over long distances.
2.0 Specifications
| Frequency Bandwidth | 3Gbps |
| SDI Splitter Input Port | 1 x BNC Female input port |
| SDI Splitter Output Ports | 4 x BNC Female output ports |
| Power Supply | DC 5V 1A |
| ESD Protection Human Body Model | ± 8kV (air-gap discharge)± 4kV (contact discharge) |
| Dimensions (mm) | 150 (L) X 65(W) X 25 (H) |
| Weight | 350g |
| Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
| Storage Temperature | 20°C ~ 60°C / -4°F ~ 140°F |
| Relative Humidity | 20 ~ 90% RH (Non-condensing) |
| Power Consumption (Max) | 1.5W |
3.0 Features
1. 1 SDI input signal split to 4 SDI sink devices.
2. Supports SD-SDI(270Mb/s), HD-SDI(1.485Gb/s), 3G-SDI(2.97Gb/s) video format.
3. Built-in cable equilibrium, clock recovery and drive.
4. Supports resolutions up to 1920x1080@60Hz.
5. Supports signal input and output distances of up to 300m for SD signals, 200m for HD signals and 100m for 3G signals.
6. Supports 5-12V wide voltage input.
4.0 Package
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
1. 1x4 SDI Splitter ----------------------------------------------- 1PCS
2. 5V1A DC Power Supply adapter ------------------------- 1PCS
3. Operation Manual -------------------------------------------- 1PCS
5.0 Operation controls and Functions
Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.
Front Panel
1. INPUT--------------------------Input lock Indication
2. POWER---------------------Power input Indication
3. ON/OFF---------------------------------Power switch
Rear Panel
4. DC 5V-12V-------------------Power input interface
5. SDI INPUT----------------------SDI Input interface
6. SDI OUTPUT1-4-------SDI Output 1-4 interface
6.0 Application Example
1. Connect the Coaxial(RJ6U) Cable between SDI signal source and SDI INPUT of SDI Splitter.
2. Connect the Coaxial Cable between SDI splitter and SDI display.
3. Connect the power adapter between SDI splitter and outlet.
4. Open the power supply of SDI signal source and the display. Choose corresponding input ports, then it works.
Product Tags:
|
|
1 x 4 SDI Signal Splitter Images
|
